Tyco America Provenance Water Curtain Nozzle Fire Nozzle Sprinkler
|FOB Price:||US $5-30 / Piece|
|Min. Order:||100 Pieces|
|Min. Order||FOB Price|
|100 Pieces||US $5-30/ Piece|
|Payment Terms:||T/T, Western Union|
- Model NO.: D3
- Sprinkler Head Type: Open
- Automatically Opened and Closed Repeatedly: Can Automatically Opened and Closed
- Closed Fire Sprinkler System: Wet Fire Sprinkler System
- Wet Alarm Valve Structure: Seat Type
- Nozzle Flow Coefficient: 115
- Material: Stainless Steel, Bronze
- Response: Quick Response
- Product Name: Tyco America Provenance Water Curtain Nozzle
- Transport Package: Standard Package
- Origin: America
- Sprinkler Installation: Upright
- Alarm Valve Type: Deluge Valve
- Open Fire Sprinkler System Type: Deluge System
- Dry Alarm Valve Type: Differential Type
- Alarm Valve Diameter: 80mm
- Deluge Valve Type: Diaphragm Type
- Thread Size: 1/2", 3/4", 1"
- Spray Angle: 90 and 120 Degree
- Trademark: TYCO
- Specification: 1/2 inch NPT
The TYCO Type D3 PROTECTO-SPRAY Nozzles are open (non-auto-matic) directional spray nozzles and they are designed for use in water spray fixed systems for fire protection applications. They are external deflec-tor type nozzles that discharge a uni-formly filled cone of medium velocity water droplets.
The D3 Nozzles are effective in cov-ering exposed vertical, horizontal, curved, and irregular shaped surfaces in a cooling spray to prevent exces-sive absorption of heat from an exter-nal fire and possible structural dam-age or spread of fire to the protected equipment. In some applications, de-pending on water design density re-quirements, the Type D3 Nozzles may also be used for fire control or extinguishment.
The Type D3 Nozzles are available in a wide variety of orifice sizes and spray angles (included angle of discharge) to provide versatility in system design. Refer to Technical Data Sheet TFP890 for information on Blow-Off Plugs that can be used for applications where protection is required against insect infestation or accumulation of debris within the nozzle orifice.
It is recommended that the end user be consulted with respect to the suit-ability of the materials of construc-tion and finish for any given corrosive environment. The effects of ambient temperature, concentration of chem-icals, and gas/chemical velocity,should be considered, at a minimum, along with the corrosive nature to which the sprinklers may be exposed.
The Type D3 PROTECTOSPRAY Noz-zle is a re-designation for the Gem Type D3.
Nozzle Placement. Where direct im-pingement of water spray onto all of the protected surface is required by the authority having jurisdiction, the nozzles are to be spaced and directed so that their spray patterns will com-pletely cover the plane-of-protection with the minimum required average density; however, it is recommend-ed that indoor nozzle spacing be 12 feet (3,7 m) or less and that outdoor nozzle spacing be 10 feet (3,0 m) or less. Where rundown or slippage is planned, such as, exposure protec-tion of vessels per NFPA 15, the above recommended indoor and outdoor spacings also apply.
When used for protecting the surfaces of a vessel, for example, the nozzles are positioned normal to and approxi-mately 2 feet (0,6 m) from the surface. This approach, in conjunction with a properly selected spray angle, will tend to make more effective use of the spray as well as help minimize the dis-turbance effects of wind/draft condi-tions on the water spray patterns.
Spray Patterns. The Design Spray Profiles for the nozzle spray angles of 65 to 180 degrees are shown in Fig-ure 2 and apply to discharge pres-sures of 20 to 60 psi (1,4 to 4,1 bar). Discharge pressures in excess of 60 psi (4,1 bar) will result in a decrease in coverage area since the spray pat-terns tend to draw inwards at higher pressures. Refer inquiries on higher discharge pressures to the Technical Services Department. The maximum axial distances between the nozzle tip and plane-of-protection, for exposure.