Tyco-Ansul Fire Fighting Pressure Foam Proportioner, Fire Proportioner
|FOB Price:||US $20-1,000 / Piece|
|Min. Order:||10 Pieces|
|Min. Order||FOB Price|
|10 Pieces||US $20-1,000/ Piece|
|Payment Terms:||T/T, Western Union|
- Model NO.: ansul
- Type: Portable Fire Extinguisher
- Size: Dn65, Dn80
- Portable Extinguisher: Portable Foam Fire Extinguisher
- Retirement Life: 12 Years
- Power Source: Chemical Reaction Fire Extinguisher
- Color: Golden
- Product Name: Tyco-Ansul Fire Pressure Foam Proportioner
- Transport Package: Standard Package
- Origin: America
- Agent: Foam
- Object: Class F Fires
- Certification: UL, Nfpa FM
- Effective Range: 9m
- Dry Powder Type: Ordinary Dry Powder
- Material: Cast Iron
- After-Sale Service: 10 Years
- Trademark: ANSUL
- Specification: DN65, DN80
ANSUL proportioners are specifically designed to accurately proportion and control the mixing of pressurized ANSUL foam concentrates into a water stream with minimum pressure loss. ANSUL proportioners are UL Listed and FM Approved with various ANSUL foam concentrates and they are used in conjunction with bladder tanks. Typical applications include flammable liquid storage tanks, loading racks, aircraft hangars, heliports, and anywhere flammable liquids are used, stored, processed, or transported.
Each ANSUL proportioner consistes of a body, inlet nozzle, and metering orifice, all of which are corrosion-resistant brass.
The proportioner body is designed with flat-faced flanges to match ANSI 150 lb flanges of the same nominal size. Clearly marked on the proportioner body is the flow direction arrow, as well as the type and percentage of the designated concentrate.
The inlet nozzle is secured by a stainless steel retaining ring that is internally concealed to prevent removal after installation.
The metering orifice is sized according to the type and percentage of concentrate used and is also secured with a stainless steel retaining ring.
The proportioner body and inlet nozzle shall be of low zinc (less than 15%) brass. The nozzle and foam orifice retaining rings shall be of stainless steel.
The proportioner body shall be disigned to connect to ANSI 150 lb flat-faced flanges; removal shall be possible without disassembly of additional pipe sections. The two proportioner flange mating faces shall be machined with 64 grooves per inch (25mm) to capture and seal against the flange gaskets.
The body shall be clearly marked with a flow direction arrow, and the type and percent of foam concentrate that it was designed to proportion.